[rotorwrench]

Just a heads up, I went to the link and checked the info on that R&P set. It should have more info on there than it has. The smaller ring gears were generally set up on a smaller diameter carrier by Dana Spicer. I would want to know what diameter carrier that R&P set was made to fit (bolt circle diameter). If it is the smaller carrier, you would have to purchase one from Randy's R&P since I know of no other "New" part source but they are for Dana 44 and may not work in the 41. It may be made to fit the 3.73:1 carrier that is smaller than the 4.27:1 ratio carrier in the Dana 44 but I don't know about the Dana 41. The ring gear just has to be measured for the bolt circle diameter.