The Ford Barn - View Single Post

CT Jack · 01-26-2016, 11:10 PM

Rod,
I am a little confused. We have the original 29 7 tooth column in the truck now. According to what you are saying the column should be 43" long. If I remove this column from the truck and disassemble it I should cut the tube to a length of 36-3/4" . This is the length of a 3 -31 2 tooth column.
If this is correct then what do I do after this? If you have the parts I need let me know.
Thanks,
Jack

01-26-2016, 11:10 PM	#4
CT Jack Senior Member Join Date: May 2010 Location: Hebron, CT Posts: 537	Re: 29 2 Tooth Steering Tube From a 7 Tooth Rod, I am a little confused. We have the original 29 7 tooth column in the truck now. According to what you are saying the column should be 43" long. If I remove this column from the truck and disassemble it I should cut the tube to a length of 36-3/4" . This is the length of a 3 -31 2 tooth column. If this is correct then what do I do after this? If you have the parts I need let me know. Thanks, Jack