Thread: Will not start
View Single Post
Old 01-03-2016, 05:33 PM   #5
Ed H.
Senior Member
 
Join Date: Jun 2013
Location: Milton NH
Posts: 148
Default Re: Will not start

Key on, cap and rotor off, hold coil wire about 1/4" from block, open and close points with a screw driver, spark should come out of coil wire. Or if you have someone crank it over results will be the same.
__________________
If you see a bomb technician running, do everything in your power to keep up with him.

United States Navy
Ed H. is offline   Reply With Quote