The Ford Barn - View Single Post

Tom Wesenberg · 11-15-2015, 09:54 PM

Remember, the ignition switch is on the ground side of the coil, so it will show voltage on both terminals only when the points are open. If the points are closed, then the ignition switch should show ground on both terminals.

11-15-2015, 09:54 PM	#33
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: No spark at distributor Remember, the ignition switch is on the ground side of the coil, so it will show voltage on both terminals only when the points are open. If the points are closed, then the ignition switch should show ground on both terminals.