The Ford Barn - View Single Post

Mitch//pa · 11-08-2015, 07:45 PM

switch on points closed you should have power to one side of the coil
switch on points open you should have power to both sides of the coil
make sure your repo switch legs are not touching the metal gas tank or youll get false readings.
loosen the dash to let it hang away from the tank

11-08-2015, 07:45 PM	#20
Mitch//pa BANNED Join Date: May 2010 Location: Bucks County, PA Posts: 11,454	Re: No spark at distributor switch on points closed you should have power to one side of the coil switch on points open you should have power to both sides of the coil make sure your repo switch legs are not touching the metal gas tank or youll get false readings. loosen the dash to let it hang away from the tank Last edited by Mitch//pa; 11-08-2015 at 07:50 PM.