The Ford Barn - View Single Post - Next A-V8 caster question

cuzncletus · 10-21-2015, 09:50 PM

Randy, thanks. I'm using the stock crossmember with spring perches from Speedway. Nothing exotic. CT AV8, I figured some of the 10-12 degrees would come out when everything was firmly bolted together, plus the angle of the radius rods and the downhill slope of the chassis.

10-21-2015, 09:50 PM	#8
cuzncletus Senior Member Join Date: Aug 2010 Location: Sevierville, Tenn. Posts: 391	Re: Next A-V8 caster question Randy, thanks. I'm using the stock crossmember with spring perches from Speedway. Nothing exotic. CT AV8, I figured some of the 10-12 degrees would come out when everything was firmly bolted together, plus the angle of the radius rods and the downhill slope of the chassis.