The Ford Barn - View Single Post

PeterC · 10-19-2015, 05:01 PM

You will get many opinions from many sources - I happen to like my Schneider 270F bcam which is employed in my 284ci S.C.o.T blown flathead - has a strong flat power band that pulls better and better as my rpm increases. I did not prioritize a rumpy idle - I prioritized pure performance 270 gross duration 230 at .050 with 365 lift. I encourage you to call Schneider and discuss your exact engine specs and power needs.

10-19-2015, 05:01 PM	#3
PeterC Senior Member Join Date: May 2010 Location: Connecticut Posts: 859	Re: blower motor cam recommendation You will get many opinions from many sources - I happen to like my Schneider 270F bcam which is employed in my 284ci S.C.o.T blown flathead - has a strong flat power band that pulls better and better as my rpm increases. I did not prioritize a rumpy idle - I prioritized pure performance 270 gross duration 230 at .050 with 365 lift. I encourage you to call Schneider and discuss your exact engine specs and power needs.