The Ford Barn - View Single Post

Rowdy · 10-19-2015, 09:36 AM

I often wonder what the value of my KRW machine is with the thrust cutter, oil groove cutter, false cams for the A and T, pouring jigs for A and T and boring bars for A and T. Payed $4500 for it and the Kwikway line bore set up in 2006. Came with several burners for babbit pots also. In order to use any of the burners I would need to convert them to OPD and build a stand. Rod

10-19-2015, 09:36 AM	#16
Rowdy BANNED Join Date: May 2010 Location: Gothenburg Nebraska Just off I-80 Posts: 4,893	Re: K.R.Wilson Combination Machine value I often wonder what the value of my KRW machine is with the thrust cutter, oil groove cutter, false cams for the A and T, pouring jigs for A and T and boring bars for A and T. Payed $4500 for it and the Kwikway line bore set up in 2006. Came with several burners for babbit pots also. In order to use any of the burners I would need to convert them to OPD and build a stand. Rod __________________ Do the RIGHT thing - Support the H.A.M.B. Alliance!!!!