The Ford Barn - View Single Post

duke36 · 07-31-2015, 05:39 PM

Thanks for posting the info. This matches my carb. Ordered some parts from Dave @ Renners who also provided helpful info. on parts installation. The double ball valve looks like the older grose jets aftermarket for the Zeniths but won't know until dis- assembly if that is leaking. .
Does any one's carb GAV (brass) housing have a fiber washer between it and the carb casting?

07-31-2015, 05:39 PM	#17
duke36 Senior Member Join Date: Jun 2015 Posts: 1,425	Re: Who's running a Marvel/Schebler carb? Thanks for posting the info. This matches my carb. Ordered some parts from Dave @ Renners who also provided helpful info. on parts installation. The double ball valve looks like the older grose jets aftermarket for the Zeniths but won't know until dis- assembly if that is leaking. . Does any one's carb GAV (brass) housing have a fiber washer between it and the carb casting?