View Single Post
Old 07-07-2015, 02:54 PM   #5
V8COOPMAN
Senior Member
 
V8COOPMAN's Avatar
 
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,184
Default Re: Tea pot carb help

[QUOTE=scooder;1116682]Chopper bloke,
I like the principal behind that little ball, it does seem to make sence, a clever idea.
It apparently worked good. If you've read about the mechanics illustrated Ford (MI FORD) the 885 was used on an 8BA engine fitted with Granatelli heads (8.5:1 if I recall) dual exhaust with glass packs and a stock loadamatic ignition bar a Mallory coil and condenser, which was fitted to eliminate a miss in the ignition above 100mph. Performance was good, don't recall the numbers, and I'm away from my stuff. It was an otherwise stock 50 or 51 Ford if I recall.

Shows a pic of him spuddleing along window open with dog walking alongside on a leash.
Sorry for calling him him, can't remember his name or the date of the magazine.
QUOTE]

You wouldn't be referring to Tom Mccahill and his black lab Joe, would you? DD
__________________
Click Links Below __


'35-'36 W/8BA & MECHANICAL FAN


T5 W/TORQUE TUBE

Last edited by V8COOPMAN; 07-07-2015 at 03:03 PM.
V8COOPMAN is offline   Reply With Quote