The Ford Barn - View Single Post

scicala · 07-05-2015, 02:15 PM

This is just my opinion, but you should consider keeping the original teapot 2 bbl. If you change, you just set off a chain reaction of work, jury rigging and money being spent to change things like, air cleaner, linkage and ignition advance. There are kits and individual parts available for you're teapot carb.

Also, Mike51Merc suggested using a power valve from a Holley 94 type carb. This is not possible. Completely different animal and design.

If you are interested in carb work, I can help.

Sal

07-05-2015, 02:15 PM	#10
scicala Senior Member Join Date: Jun 2010 Location: Detroit suburb, MI Posts: 3,794	Re: Tea pot carb help This is just my opinion, but you should consider keeping the original teapot 2 bbl. If you change, you just set off a chain reaction of work, jury rigging and money being spent to change things like, air cleaner, linkage and ignition advance. There are kits and individual parts available for you're teapot carb. Also, Mike51Merc suggested using a power valve from a Holley 94 type carb. This is not possible. Completely different animal and design. If you are interested in carb work, I can help. Sal