[Arty]

Thanks for responses. Unfortunately the instructions leave a bit to be desired in terms of details and I do not have a finished one readily available to reference. I see in the second picture the cloth covers the back (outside) of the beltline wood down to where the trim piece would cover the bottom edge. So when the rear window is pulled up it is finished. Mine was cut short, so looks like I have some work to do this weekend.

The last picture shows the a bit of a gap between the filler and support; the same as mine so I am assuming the two were not glued or riveted together.

Marco - do you recall if their was cloth covering the mid-section of the roof (visible from inside) and then the top or was the underside of the top the interior roof?

Thanks again. Great looking interior work