Re: head removal
When I broke my dizzy hold down bolt I had to remove the head to fix it. In the process I broke 3 head bolts (should of used a impact wrench) =/ anyways...if you look on Reds Heads website you will find a process of extracting the broken bolts in your block while the engine is still in the car. This worked wonderfully for me =) I would even lend a fellow Ford Barner the needed sleeves for drilling mentioned on Reds website.
Good luck!
Also.. I've read of people blowing them out with a torch (scary) or welding a washer and a nut to the broken bolt. Personally I've had no experience with either of those.
Randy
|