The Ford Barn - View Single Post

JTW · 05-02-2015, 09:01 AM

Air hammer with the same tool to fit it. Make sure the rivet is the right length sticking out, usually 1 1/2 time diameter. Bucking bar to fit on the back side. The aircraft industry has a lot of interesting rivet tools that they use, you might want to check that out also.

05-02-2015, 09:01 AM	#2
JTW Senior Member Join Date: May 2010 Location: Owls Head Posts: 257	Re: Tool for attaching rivet to Deck Door... Air hammer with the same tool to fit it. Make sure the rivet is the right length sticking out, usually 1 1/2 time diameter. Bucking bar to fit on the back side. The aircraft industry has a lot of interesting rivet tools that they use, you might want to check that out also. __________________ Driving old Fords since 1947