View Single Post
Old 03-28-2015, 02:32 PM   #9
Synchro909
Senior Member
 
Synchro909's Avatar
 
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 8,044
Default Re: De-Pickling the Model A Engine

Quote:
Originally Posted by Tom Wesenberg View Post
After 3 years, if you still have oil in the cylinders, you have the world's best rings. I would try hand cranking the engine over a couple revolutions, to make sure it doesn't hydrolock, and to make sure each cylinder has compression, then I'd try starting it.

Hopefully you don't have any stuck valves.
Try cranking it over with the plugs out. If any oil comes out of the holes, your rings are better than any I've ever seen. If no oil appears, you are safe to crank it on the starter for a few turns, then turn on the fuel and go for fire in them holes.
__________________
I sometimes wonder what happened to the people who asked me for directions.
Even at my age, I still like to look at a young, attractive woman but I can't really remember why.
Synchro909 is offline   Reply With Quote