The Ford Barn - View Single Post

Old Henry · 03-25-2015, 10:50 PM

I'm tired of my stock dash gauge reading so much lower than my mechanical gauge. I took the gauge mechanism out and see two adjustments inside that can be made. Has anyone every adjusted that gauge and know how? Here's the inside:

You can see two sets of teeth overlapping a hole at 1:00 and 8:00. Which do I adjust and which way?

03-25-2015, 10:50 PM	#1
Old Henry Senior Member Join Date: Oct 2010 Location: Orem, Utah Posts: 5,762	How to calibrate oil pressure gauge? I'm tired of my stock dash gauge reading so much lower than my mechanical gauge. I took the gauge mechanism out and see two adjustments inside that can be made. Has anyone every adjusted that gauge and know how? Here's the inside: You can see two sets of teeth overlapping a hole at 1:00 and 8:00. Which do I adjust and which way? __________________ Prof. Henry (The Roaming Gnome) "It is good to have an end to journey toward; but it is the journey that matters, in the end.” *Ursula K. Le Guin in The Left Hand of Darkness