Re: Resistor for 6 volt points
The whole panel looks like this, a fuse for the lighting circuits and the resister for the coil. Power from the starter solenoid goes to one side of the fuse (Y). This is also the connection point for generator (YB), the ignition switch (YB) and the cigar lighter (YG). The other side of the fuse connects to the lighting switch (YR) and the pillar lights switch (B-BL). The ON side of the ignition switch connects to the resister (BR) and the gauges (BG). The other side of the resister connects to the coil (R).
(Y) Yellow
(YB) Yellow/Black
(YG) Yellow/Green
(YR) Yellow/Red
(B-BL) Black/Blue
(BR) Black/Red
(BG) Black/Green
(R) Red
Last edited by JSeery; 03-23-2015 at 09:26 PM.
|