The Ford Barn - View Single Post

hardtimes · 03-16-2015, 01:37 AM

You are correct regarding the scat A crank.
1929 did not mention whether he wanted an A or B crank. He wanted counterweights and my mind went right to model B/C cranks with integral counterweights, because that's what I use. I figured that maybe 1929 did not know of this counterweighted crank. That said, if you want a scat to install in a B block, then I stand on what I wrote regarding that crank having B size mains and A size rod throws.

03-16-2015, 01:37 AM	#7
hardtimes Senior Member Join Date: May 2010 Location: South California Posts: 6,190	Re: welded crankshafts You are correct regarding the scat A crank. 1929 did not mention whether he wanted an A or B crank. He wanted counterweights and my mind went right to model B/C cranks with integral counterweights, because that's what I use. I figured that maybe 1929 did not know of this counterweighted crank. That said, if you want a scat to install in a B block, then I stand on what I wrote regarding that crank having B size mains and A size rod throws.