02-24-2015, 02:12 PM
|
#7
|
|
Senior Member
Join Date: May 2010
Location: Fresno, Ca.
Posts: 168
|
Re: Converting model a starter switch to pushbutton
Step 1: Disconnect the battery
Step 2: Remove the foot plunger
Step 3: Take the original switch apart, reassemble it with the copper strip upside down (you may have to bend it a little so the strip makes constant contact) and re-install the assembly.
Step 3: Install a Ford solenoid and wire it as per this diagram:
Step 4: Drive
|
|
|