Re: Hi-Volume Oil Pump
Quote:
Originally Posted by CarlG
Do you have any pictures of how you accomplished this arrangement?
|
Unfortunately, I didn't take any pictures before I closed it all up but it is basically this except I took the oil feed from the body of the oil pump and the fitting in the bearing cap is a tee. the part of the tee facing straight down is where I mounted the valve I made. I aimed at 25 psi and it runs at 26 - up to 40 when cold. Happy with that! It is not much different from what Brent has shown.
__________________
I sometimes wonder what happened to the people who asked me for directions.
Even at my age, I still like to look at a young, attractive woman but I can't really remember why.
|