Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by darrell
what it all boils down to is everything will fit the 292 block except rods and crank.unless your prepared to do what miker is talking about and cut your 312 crank to fit.
|
Quote:
Originally Posted by Charlie Stephens
Be sure you don't throw anything away until you finish.
|
Yes, use everything you can that was on the 312 to build the 292 engine. You'll need EBU rods to match the 292 crank and 292 pistons to match the crank/rods & bore.
http://www.ford-y-block.com/dimensions.htm
The timing cover, damper pulley, exhaust manifolds, oil pan, PS mounting brackets, dipstick tube, generator (& its mounting brackets) and probably a couple more things I forgot, are all T-Bird specific but they'll fit on either block.
Here's a link to a 'Mistakes not to make' list....
http://www.ford-y-block.com/assemblyerrors.htm