Quote:
Originally Posted by Mel Gross
Good Morning To All;
Thanks for the comments!
My dad has been gone for more then a year now and his wish was for me to carry on. I had been working with him for more then 10 years. His overall knowledge of Model A's will not be able to be duplicated by me, but I am trying very hard to be just like him. His reputation was excellent and it will not be tarnished no matter what it takes. We take care of our fellow Model A friends.
One of the services besides selling product is doing the brake drums to hub work along with rebuilt backing plates.
If you need to reach me, then either call me at 714-292-8660 or email me at [email protected]
Again, we will take good care of you and make sure that you are satisfied with our product and workmanship.
Thanks
Randy Gross
Son of Mel & Jackie Gross |
Randy Gross has carried on the excellent reputation that his late father Mel created. Part of his service is to properly mount the new drums to existing hubs. This process is almost an art form. You want to be very careful where you have this type of service done. Most commercial brake shops don't have a clue about the swaging process and will likely crack a cast iron drum and\ or warp the hub flange. Your best bet is to let Randy do the whole job for you. His prices are very reasonable.
Tom Endy