The Ford Barn - View Single Post

Dbbc · 01-21-2015, 01:56 PM

To answer Tom's questions
1. Do you have 6 volts on both terminals with the key off?
Yes
2. With the key on and points open, do you still have 6 volts on both terminals?
Yes
3. Do you have 0 volts on one terminal with the key on and points closed?
Yes

Regarding gas, I drained the tank and got new gas. No change.

Regarding the condenser.
The condenser does not spin just the threaded copper end, so it can't be tighten.
The length of the screw shouldn't matter? Did not see a fiber washer? maybe it fell in the distributor. Will check.

Parts on the way.

01-21-2015, 01:56 PM	#14
Dbbc Senior Member Join Date: Apr 2014 Location: Honolulu Posts: 116	Re: Still won't start To answer Tom's questions 1. Do you have 6 volts on both terminals with the key off? Yes 2. With the key on and points open, do you still have 6 volts on both terminals? Yes 3. Do you have 0 volts on one terminal with the key on and points closed? Yes Regarding gas, I drained the tank and got new gas. No change. Regarding the condenser. The condenser does not spin just the threaded copper end, so it can't be tighten. The length of the screw shouldn't matter? Did not see a fiber washer? maybe it fell in the distributor. Will check. Parts on the way.