The Ford Barn - View Single Post

Mitch//pa · 01-21-2015, 07:41 AM

what Tom posted in #42 is the basics for spark to occur...its very,, very simple :::
dont get all wrapped up in checking a 2.00 condenser if the post spins its junk, and even if it did not spin always keep a known good one on hand to swap out when having a spark issue.. as mentioned use the fiber washer underneath the proper length screw..
i have tested condensers that showed good but were still bad...

01-21-2015, 07:41 AM	#13
Mitch//pa BANNED Join Date: May 2010 Location: Bucks County, PA Posts: 11,454	Re: Still won't start what Tom posted in #42 is the basics for spark to occur...its very,, very simple ::: dont get all wrapped up in checking a 2.00 condenser if the post spins its junk, and even if it did not spin always keep a known good one on hand to swap out when having a spark issue.. as mentioned use the fiber washer underneath the proper length screw.. i have tested condensers that showed good but were still bad...