Quote:
Originally Posted by Charlie Stephens
You forgot to mention to hold the coil wire with an insulated tool (or maybe your computer adjusted your punctuation). Of course he probably would have figured that out pretty quick. You probably don't need the insulated tool for the points as they are only 6 volts.
Charlie Stephens
|
I don't like to use my fingers when fooling around with sparks and generally wear a pair of good gloves even to hold a coil wire by the insulation.
There used to be a mechanic at a shop here locally years ago who would check for spark, on any vehicle, by holding on to the end of the coil wire while the engine was turning over with the ignition on. If he wasn't satisfied by the amount of shock he received he considered the spark to be weak!