Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by edmondclinton
When you're checking for sparks, not just any ol' spark will do. You need a fat blue-white spark!
Make sure the engine is in a position where the points are closed. Turn on the ignition. Disconnect the coil wire from the dist. and hold the end just removed about 1/4 inch away from a head nut. Using a screwdriver or some other insulated tool, open the points. A fat blue-white spark should jump from the coil wire to the head nut if everything is healthy.
A thin yellowish spark is weak and is no good and of course no spark is most certainly no good.
Allow the points to snap closed if you want to repeat the process for another look.
If the gap is correct on your points I bet they are just oxidized and need cleaning. Points do that just from exposure to the air in the atmosphere. That's why it's best for people to go to the trouble to make sure the engine is in the correct position for the points to be closed when storing a car that will not be run for a long time.
It's also possible that your points may be pitted and burnt and several other things may be the cause of your problem as have already been mentioned. Come back for more instruction if you can't get it going.
|
You forgot to mention to hold the coil wire with an insulated tool (or maybe your computer adjusted your punctuation). Of course he probably would have figured that out pretty quick. You probably don't need the insulated tool for the points as they are only 6 volts.
Charlie Stephens