The Ford Barn - View Single Post

Ed in Maine · 01-09-2015, 05:18 PM

I would be more concerned with over filling the rear end. You don't want the oil to get by the worn seals into your rear brakes. Do not fill to the bottom of the hole, stick your little finger into the hole and check for fluid on the end of your finger. I would guess this would place the fluid level about 1/2 in. below the hole. Ed

01-09-2015, 05:18 PM	#9
Ed in Maine Senior Member Join Date: May 2010 Location: Washington Cty., ME or Flagler Cty., FL Posts: 1,193	Re: 600W Rear End I would be more concerned with over filling the rear end. You don't want the oil to get by the worn seals into your rear brakes. Do not fill to the bottom of the hole, stick your little finger into the hole and check for fluid on the end of your finger. I would guess this would place the fluid level about 1/2 in. below the hole. Ed