The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   Powerhouse Adjusting Arm (https://www.fordbarn.com/forum/showthread.php?t=9149)

Charles Reese 07-28-2010 04:43 PM
Powerhouse Adjusting Arm
 

A10152 Generator Adjusting Arm (5-brush powerhouse). Cad plated or painted black? Finish is not described in RG&JS.

Gary Karr 07-28-2010 06:35 PM
Re: Powerhouse Adjusting Arm
 

Charles, I believe that the arm itself is cad plated and the bolt is unfinished.

Tom Wesenberg 07-28-2010 06:41 PM
Re: Powerhouse Adjusting Arm
 

I don't know about the very early one's, but all I've seen have been painted black.

d.j. moordigian 07-28-2010 07:22 PM
Re: Powerhouse Adjusting Arm
 

In the Finishing Standards...." dipped or sprayed with black enamel:"

Fred 07-28-2010 07:30 PM
Re: Powerhouse Adjusting Arm
 

Do you have the very first style P/H or the FIRST with the later Y front mounting bracket ..??

Charles Reese 07-28-2010 08:07 PM
Re: Powerhouse Adjusting Arm
 

i am not in the 'very early' category ... i have the 5 brush with the 'y' mounting bracket .... i have read about, but never seen, the very early style mount. i do have the special bolt that the adjusting arm attaches to on the cyliner front cover.

Steve Ciccalone 07-28-2010 08:19 PM
Re: Powerhouse Adjusting Arm
 

cad and unfinished as Gary states.


All times are GMT -5. The time now is 04:16 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.