The Ford Barn - 1930-31 Sheet Metal-Roadster, Coupe, Sport Coupe

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Model-A (https://www.fordbarn.com/forum/forumdisplay.php?f=8)

- - 1930-31 Sheet Metal-Roadster, Coupe, Sport Coupe (https://www.fordbarn.com/forum/showthread.php?t=83858)

1930-31 Sheet Metal-Roadster, Coupe, Sport Coupe

City: Bellingham

I am redoing this thread as the first go around was confusing. Parts are now numbered, so please let me know what part you want based on the number. Others are not numbered because they are easily identified :p :P

Its time to clean out the garage and sell a bunch of extra sheet metal, some in pretty good shape to some in decent shape, but it may take a little work. I would gladly trade for good condition Model A banger/speed parts.

It is all for 30-31 bodies, primarily coupe, sport coupe and roadsters. All prices are excluding shipping. All original Henry Ford steel aside from the new running boards.

Running Boards (Gray)-these are in fantastic shape. No dents, dings or rust at all! Masking tape is over the chrome still to protect it from scuffs and scrapes. Has the splash aprons welded on! Nice US made part!-$SOLD

Running Boards (red and black)-Left side is in fantastic shape, the right side needs the hole patched however. Easy fix though, no trim or mat however.-$SOLD

Decklid-needs some work and patching up. Overall solid, just needs a skin patch on the outside and maybe some patching inside for the handle.-$SOLD

Rumble seat riser pan, needs to be sandblasted but otherwise in great shape, no rust through, just surface rust.-$SOLD

1930-1931 Hood-Sandblasted and partially primed

Fender 1: $35
Fender 2: $200 Great shape, wheel well; front left
Fender 3: $45
Fender 4: $80
Fender 5: $100 Decent shape, needs patching in places; front right
Fender 6: $SOLD
Fender 7: $SOLD
Fender 8: $SOLD
Fender 9: $SOLD

Panel 1: SOLD
Panel 2: PACKAGE TRAY
Panel 3: SOLD

Rear Cross Sill: Offers
-According to Mac's this part is called:
Model A Ford Sub Frame Channel - Rear Crossmember - Die Stamped - Fits Below Outer Panel At End Of Subrails - Roadster & Coupe
http://macsautoparts.com/model-a-for...0R3CHL1068770/

Feel free to PM me if you have questions or want additional photos. Prices are OBO.

Thanks!