Torque tube bearing removal
 

Can anyone tell me the correct method for removing a center ball bearing plus neck race and seal from a 40's ford Torque tube?

Re: Torque tube bearing removal
 

Here ya go. Search and ye shall find.
https://www.fordbarn.com/forum/showth...earing+removal

Re: Torque tube bearing removal
 

Hey 19Fordy,
Thanks much for your input:) ! Wow, what a timely search article...for my situation. Not knowing the car that I got..at all, I was looking at the grease zerk yesterday. So, lots of questions answered in referred thread. Just about to repeat same questions today..now know answers.
Now I can move on to the million other questions,eh;) !

Re: Torque tube bearing removal
 

Here's Skips literature and instructions for the center bearing. G.M.

Re: Torque tube bearing removal
 

The seal is pulled out the neck side, I used a dent puller with a washer on the end. I used this pipe to knock the center bearing loose.
http://i13.photobucket.com/albums/a2...s/P1020362.jpg