Blueprint Patterns
 

Are there any blueprint patterns availble online to download for cowl panels,door panels or side panels for the 1930 std. coupe and rumble seats????
Thanks, Tom

Re: Blueprint Patterns
 

- oops, misread the original post. Sorry. -

Re: Blueprint Patterns
 

Re: Blueprint Patterns
 

yes...the interior is what I was looking for. Thanks to all, Tom

Re: Blueprint Patterns
 

I've traced them out from originals in the past.Now,I buy the pre-cut unfinished panels from LB. On an open pickup the price between pre-cut and raw panel board was $7.by the time I was through with oversize shipping for raw panel board.

Re: Blueprint Patterns
 

Thank you for that info. I'm better off just getting everything from one of the vendors. out of all the vendors...who is the best, and is it possible to get the mohair like before?

Re: Blueprint Patterns
 

well if they arnt availible ,lets make them availible
Jim ,Vince ,you can put it on your sites
this is for 30 tudors ,and coupes,pickups,stationwagons and sedans
tom moniz

its missing a few dimensions ,its just too big for my scanner
at the top the 11 3/8 is the total of all the smaller dimensions 2 3/8+ 2 3/4 +2+2+2
and the overall height of 17 13/16
plus the left upper 5 1/4 of welting that extends off the top of the scan

Re: Blueprint Patterns
 

Hey any chance you can rescan possibly in 2 diagrams and relist all dimensions, previous scan most dimensions unreadable! also if door patterns for 30-31 coupe are available. Thanks.