8ba in 29 A - best steer box
 

I have an 53 f100 steer box its too much box would an f1 box fit any better? OR IS THERE SOMETHING ELSE COOL TO USE? THE STOCK A BOX ? I DONT HAVE AN A BOX AT THIS TIME! BUILDING THE CAR FROM SCRAPES !! HAVE SPEEDWAY CENTER DUMP HEADERS! WOULD APP COOL INPUT! THANKS

Re: 8ba in 29 A - best steer box
 

My rod I'm working on is getting an old dirt track race car steering box which has the same throw as the original box so you just need to extend the drag link.

Re: 8ba in 29 A - best steer box
 

Good afternoon. I am not sure many of us here will have the cool answer for you however I know you want to get the right one. Is it possible this would be better asked over on HAMB which caters more to the type vehicle you are building? Good luck in whichever gear box you decide to go with!!

Re: 8ba in 29 A - best steer box
 

The only difference in a F100 and a F-1 is year. F-1 is to 52 and F100 is after 52. Same truck. Lots of people use the F100 box in Model A's. You just need to find someone who modifies them for that application. Someone here can provide that info.

Re: 8ba in 29 A - best steer box
 

F-1 box fits the Av8 better than the F100 because the worm & shaft comes out under the sector rather than the top clearing the engine easier. The column angle is steeper , but you get used to it. Either one should have the mounting flange modified to fit the frame.

Re: 8ba in 29 A - best steer box
 

F 1 box works great. If you need some help send me email and I will sow you how I did the one on my AV8.
Walter [email protected]

Re: 8ba in 29 A - best steer box
 

You can not use a stock box with out modifying the frame.