41 Ford Rear Fender Work
 

here are 2 41 ford rear fenders i fixed up.beautiful california fenders!! just alot of dents and dings !


http://i130.photobucket.com/albums/p...d/DSC05112.jpg

http://i130.photobucket.com/albums/p...d/DSC05113.jpg

http://i130.photobucket.com/albums/p...d/DSC05121.jpg


heres the other fender it was a bit more involved

http://i130.photobucket.com/albums/p...d/DSC05129.jpg

dents and way thinned out from who ever put the previous patch in

http://i130.photobucket.com/albums/p...d/DSC05130.jpg

http://i130.photobucket.com/albums/p...d/DSC05132.jpg

new patch going in

http://i130.photobucket.com/albums/p...d/DSC05137.jpg


the bottom was just rusty enough to need replaced

http://i130.photobucket.com/albums/p...d/DSC05138.jpg

some of this fine work in a mounting hole

http://i130.photobucket.com/albums/p...d/DSC05140.jpg

all finished up !!

http://i130.photobucket.com/albums/p...d/DSC05142.jpg

http://i130.photobucket.com/albums/p...d/DSC05143.jpg

http://i130.photobucket.com/albums/p...d/DSC05145.jpg

http://i130.photobucket.com/albums/p...d/DSC05146.jpg

Re: 41 Ford Rear Fender Work
 

good job. looks like you are a pick and file man. the way bodywork should be done.

Re: 41 Ford Rear Fender Work
 

Hi,
just a little bit of information you probably know.
The station wagon rear fenders are just a little bit longer than all of the other cars in 1941. Same thing for the stainless steel trim.also when you install the heavy steel tail light backing plate, it is a good idea to use some silicone sealer in between the plate and the fender.it will kep out dirt and mud. My two cents worth


al

Re: 41 Ford Rear Fender Work
 

Nice work there my man. Congratulations on a fine finish job.