![]() |
Oil Pump Screen How do get to the screen on the oil pump for cleaning. I removed the one screw on the top cover but the cover wont budge. Am I missing something?
|
Re: Oil Pump Screen There are 2 different pumps. One does not have any screws on the cover and are not re-buildable. The other should have 2 screws on the cover and are removable. You can also remove the bottom plate and pull the screen off there. If I were cleaning the pump, I would remove both, the cover and the bottom plate and clean inside the housing.
|
Re: Oil Pump Screen thanks for your sugestion I found the second screw and removed the screen. I am sure glad I did it was all gummed up. thanks again
|
Re: Oil Pump Screen Welcome.
|
All times are GMT -5. The time now is 06:44 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.