The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   pic of vin font? (https://www.fordbarn.com/forum/showthread.php?t=59229)

b ramsey 01-16-2012 10:58 PM

pic of vin font?
 

anyone have a pic of what the number 1 should look like for 1930? searched and seen it look like a capital I. this confuses me. also, dont worry, im just restamping the numbers to make them readable.

Tinker 01-16-2012 11:12 PM

Re: pic of vin font?
 

I think an an old restorer mag had an article on what was period correct but I don't remember the exact publication date. Good luck

al's28/33 01-16-2012 11:15 PM

Re: pic of vin font?
 

Judging standards has the samples for 28-29 and 30-31. Yes your "1" will look like an "I"....not sure when the change was made. #s 6 and 9 were also redesigned.

Kurt in NJ 01-16-2012 11:16 PM

Re: pic of vin font?
 

On page 542 of the service bulletins there is an illustration of both styles of numbers used.

Tinker 01-16-2012 11:18 PM

Re: pic of vin font?
 

Quote:

Originally Posted by al's28/33 (Post 345011)
Judging standards has the samples for 28-29 and 30-31. Yes your "1" will look like an "I"....not sure when the change was made. #s 6 and 9 were also redesigned.

6 and 9s are different later.

b ramsey 01-16-2012 11:21 PM

Re: pic of vin font?
 

pg 542 of what service bulletins? is it online somewhere? im not restoring it to anyones judjing standards, just want this to be correct.

Gary WA 01-16-2012 11:38 PM

Re: pic of vin font?
 

2 Attachment(s)
here!

b ramsey 01-16-2012 11:41 PM

Re: pic of vin font?
 

thanks!

jim k 01-17-2012 08:31 AM

Re: pic of vin font?
 

does anybody know of a web site that will tell the month and day a car is made by the serial number

JBR 01-17-2012 08:42 AM

Re: pic of vin font?
 

Pluck's site will tell you the month and day you motor was accepted and passed at the end of assembly. Your car could have been assembled any where up to 3 months after that date. To my knowledge that is no way to narrow it down any more that that. Someone will correct me if I am wrong.
Jon


All times are GMT -5. The time now is 08:40 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.