The Ford Barn - GAV valve

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)

- - GAV valve (https://www.fordbarn.com/forum/showthread.php?t=45226)

mot	08-18-2011 01:37 PM

GAV valve

1 Attachment(s)

A week or so ago a question was asked why the GAV valve stopped in a different position after a rebuild
there are several different GAV valves
If a different one went in during the rebuild ,it would have a small effect on the needle valve position
either will work
this is just for the ones with the little brass seat
here are two original ones
tom

All times are GMT -5. The time now is 04:04 AM.