The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   Shout out to Steve Blancard ndnchf (https://www.fordbarn.com/forum/showthread.php?t=357938)

34fordy 06-01-2026 02:30 PM

Shout out to Steve Blancard ndnchf
 

What a great service from Steve. I ordered a generator about 11:30 AM and it was at the post office before 2 PM.

flatford8 06-01-2026 04:36 PM

Re: Shout out to Steve Blancard ndnchf
 

I’ll add a second to your comment……I’ve done business with Steve a couple of times and it’s been a pleasure both times……..Mark

Seth Swoboda 06-01-2026 04:57 PM

Re: Shout out to Steve Blancard ndnchf
 

Do you have contact information for Steve?

alexiskai 06-01-2026 05:19 PM

Re: Shout out to Steve Blancard ndnchf
 

Quote:

Originally Posted by Seth Swoboda (Post 2453936)
Do you have contact information for Steve?


https://uploads.tapatalk-cdn.com/202...8293940b83.jpg

GB SISSON 06-01-2026 06:42 PM

Re: Shout out to Steve Blancard ndnchf
 

It's pretty obvious from his posts that he loves what he does. Combine that with the fact that he's also really good at it reminds me of this old Ford hobby 30 years ago! We still have some of the great ones among us, but we lose a few as the years go by.

KiWinUS 06-01-2026 06:52 PM

Re: Shout out to Steve Blancard ndnchf
 

Great guy does over the top work. A pure craftsman.

34fordy 06-01-2026 07:34 PM

Re: Shout out to Steve Blancard ndnchf
 

1 Attachment(s)
Here is the “Master Craftsman”

ndnchf 06-02-2026 05:03 PM

Re: Shout out to Steve Blancard ndnchf
 

2 Attachment(s)
Thank you all for the kind words. Some of you may know that I'm retired and restore generators on the side. Been doing it about 35 years as a hobby. I don't do it to pay the bills, so I can take more time on each one than a comercial shop could. I try to make them as good, reliable and visually correct as possible. And yes, I run my generators on my own cars. A '31 model A pickup and '35 Fordor.
Steve

nelsb01 06-02-2026 05:31 PM

Re: Shout out to Steve Blancard ndnchf
 

Don't forget about the cutouts that he also works on.

I have one and it is the best.

petehoovie 06-02-2026 05:37 PM

Re: Shout out to Steve Blancard ndnchf
 

Quote:

Originally Posted by ndnchf (Post 2454051)
Thank you all for the kind words. Some of you may know that I'm retired and restore generators on the side. Been doing it about 35 years as a hobby. I don't do it to pay the bills, so I can take more time on each one than a comercial shop could. I try to make them as good, reliable and visually correct as possible. And yes, I run my generators on my own cars. A '31 model A pickup and '35 Fordor.
Steve

https://www.fordbarn.com/forum/attac...2&d=1780437632

https://www.fordbarn.com/forum/attac...3&d=1780437632


All times are GMT -5. The time now is 03:02 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.