Question for the group regarding new reproductions and items available again.
 

Warbird just posted about Drake re-issuing 1940 bumper guards (ty). Mike Driscoll started a thread years ago "New Products Available...", of which I have posted to several times.


The questions I have is first is the "New Products Available..." of value to the group?


Should re-issues of previouly reproduced items be posted to the "New Products Available..." (as I have done with a couple of Carpenter items), To a new "Repro Parts Available Again" thread, as an individual thread (as Warbird did), or not at all? Should there be time limit for having been out of stock? If so how long... 1 year, 2 years, 5 years?


This forum is supposed to avoid blatant advertising, so most posters to the "New Products Available..." have limited themselves to one announcement (or occasional progress reports to a project with beginning, intermediate and end reports". Should this convention also apply if a "Repro Parts Available Again" thread get started?


Karl

Re: Question for the group regarding new reproductions and items available again.
 

I like the idea of notices regarding repro parts that come back into production and sale. So many parts seem to have stopped being produced, for lots of reasons, but if someone restarts a production of an out-of-stock item, I think it's worthy of a mention.

Re: Question for the group regarding new reproductions and items available again.
 

I also like the idea of notices for repro parts that come back into production. For instance, any '42-'47 pickup specific parts being available again. They were scarce ten+ years ago...now there are nearly none, unless they're also used on the cars. For me, because I own one, knowing about available repro parts for them is important.

Re: Question for the group regarding new reproductions and items available again.
 

I like the idea of posting new restoration products or back in stock after a good while. It reminds me that now would be the time to order, before the supply disappears forever.

Re: Question for the group regarding new reproductions and items available again.
 

I agree with all the above.

Re: Question for the group regarding new reproductions and items available again.
 

When a reproduction part become unavailable (or "out of stock" on all the vendor websites) for an extended period (like 6 months), I tend to assume that it's gone forever. So, posting a notice about the re-issue of formerly unavailable parts is very helpful. A thread titled "Repro parts available again" is a good idea, but should avoid blatant advertising, so maybe if an item has been unavailable for one year, it should be OK to post about it.

Re: Question for the group regarding new reproductions and items available again.
 

Great idea and service.

Re: Question for the group regarding new reproductions and items available again.
 

[QUOTE=Karl Wescott;2435443]Warbird just posted about Drake re-issuing 1940 bumper guards (ty). Mike Driscoll started a thread years ago "New Products Available...", of which I have posted to several times.


The questions I have is first is the "New Products Available..." of value to the group?


Karl, I watch that thread frequently if for no other reason, simple curiosity.
My .02¢?
Maybe a "heads up" within that thread of previously (long out of stock) items that have resurfaced should serve all of us well.

Re: Question for the group regarding new reproductions and items available again.
 

How about "Reproduction Parts back in stock". Also in the ad what supplier or suppliers have them.

Re: Question for the group regarding new reproductions and items available again.
 

Letting folks know that previously out of stock parts are available is a good idea.

Re: Question for the group regarding new reproductions and items available again.
 

"New Products Available..." of value to the group?
IMO Yes!

Re: Question for the group regarding new reproductions and items available again.
 

Karl,
My .02 and admittingly I had started that thread; you and I being dealers are aware of items that resurface after months of no stock. The average consumer is not and that can put them on hold. A great example is the 40 bumper guards. I am working on a 1940 and while as a vendor I knew they were coming back, if I was a consumer I would have shipped off the originals to a plater to spend $150.00 each without knowledge they are back available. The good thing with drake unlike others is if you click "back in stock" their site it shows the new arrivals. From talking with Trent Drake I know they have a few needed parts that will be back available this spring/summer

I also know that that thread shouldn't be to "self promote" and I know you and I post things we have just come out with. Maybe that is walking a fine line of self promotion but I feel it is simply getting word out of something new available.

Re: Question for the group regarding new reproductions and items available again.
 

35fordtn makes a very valid point. "Self promotion" will not be a problem.

Re: Question for the group regarding new reproductions and items available again.
 

If the fresh availability of a part that has been out of production is okay, I would like to use the “new item” to announce that the 8BA-6335 rear seal retainers are available again. I like the idea, particularly when the item has been unavailable for a year or more. So I would vote in favor of this.

I would also be in favor of the moderators making that thread a sticky at the top of the forum. People won’t naturally go to the trouble of searching for the thread, but would take a look regularly….especially if they are currently looking for a part at the moment.

Re: Question for the group regarding new reproductions and items available again.
 

In addition to making it a stickyt, formating as a spreasdsheet would bne very helpful:

Item description
Item number
URL to vendors ordering page
etc.

Something like this from Google:
https://support.google.com/docs/answ...315755039&rd=3

"Want advanced Google Workspace features for your business?

Try Google Workspace today!

To make a document, spreadsheet, or presentation available for a large audience to see, publish the file. After you publish your file you can send a new URL to anyone or embed into your website.

Important: Based on your account’s settings, when you publish a file, you can make it visible to everyone on the web, everyone in your organization, or a group of people in your organization. Be careful when publishing private or sensitive info."