![]() |
'35 / '36 Wind deflectors 2 Attachment(s)
Any of you guys ever seen these?
I'm thinking they gotta be rare. Box states 35 / 36 closed car. |
Re: '35 / '36 Wind deflectors I have seen these before and there may be a difference between 35 and 36 Fords even if they may fit both years.
If you want more details contact Don Rogers who has factory type drawings of both 35 and 36 Fords wind deflectors. |
Re: '35 / '36 Wind deflectors My 38 Zephyr had something like them only more oval. The cool thing was when you rolled the window down about one inch the top was still in the door but the front edge would be open so it would work like a wing window inceasing airflow. Tim
|
Re: '35 / '36 Wind deflectors 2 Attachment(s)
Quote:
|
Re: '35 / '36 Wind deflectors I have a set but have never used them. Mine don’t have the seals.
|
Re: '35 / '36 Wind deflectors Quote:
https://www.fordbarn.com/forum/attac...8&d=1763127111 |
Re: '35 / '36 Wind deflectors 2 Attachment(s)
Just to add to the conversation here is a original ford flyer for 1937 wind wings.
|
Re: '35 / '36 Wind deflectors Quote:
https://www.fordbarn.com/forum/attac...2&d=1763133109 |
Re: '35 / '36 Wind deflectors 1 Attachment(s)
Bob Drake manufactured and sold them at one time. There's some on eBay currently.
- https://www.fordbarn.com/forum/attac...9&d=1763142113 |
Re: '35 / '36 Wind deflectors [QUOTE=Randy in ca;2422917]Bob Drake manufactured and sold them at one time. There's some on eBay currently.
- The pair on ebay are not Ford but rather, Casco, an early after-market parts manufacturer. |
Re: '35 / '36 Wind deflectors Quote:
The Casco ones aren't the ones I was referring to in my previous post. Those (1935-39 Bob Drake product) can be seen on eBay at this link: https://www.ebay.com/itm/186523545641 - |
Re: '35 / '36 Wind deflectors [QUOTE=Randy in ca;2423010]
Quote:
|
Re: '35 / '36 Wind deflectors [QUOTE=glennpm;2423021][QUOTE=Randy in ca;2423010]
Thanks Glenn. I had not seen those. Much obliged to ya :) |
Re: '35 / '36 Wind deflectors [QUOTE=Kube;2423041][QUOTE=glennpm;2423021]
Quote:
|
| All times are GMT -5. The time now is 09:32 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.