The Ford Barn - Rear motor mounts

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)

- - Rear motor mounts (https://www.fordbarn.com/forum/showthread.php?t=351508)

rustyparts

08-13-2025 03:15 PM

Rear motor mounts

Hi, I just put new rubber on the 1930 rear motor mounts. Would like to know how tight to make the castle nuts. Is it just enough to get the cotter pins in, or tighten them down. Thanks in advance, Gary

nkaminar

08-13-2025 03:36 PM

Re: Rear motor mounts

Snug, not loose and not tight.

Oldgearz

08-13-2025 05:03 PM

Re: Rear motor mounts

Quote:

Originally Posted by nkaminar (Post 2406112)

Snug, not loose and not tight.

Sounds about right. Agree.

Bob C

08-13-2025 05:07 PM

Re: Rear motor mounts

1 Attachment(s)

As long as you have the spacers installed I don't see why you can't snug them down tight.

Y-Blockhead

08-13-2025 07:15 PM

Re: Rear motor mounts

Quote:

Originally Posted by Bob C (Post 2406130)

As long as you have the spacers installed I don't see why you can't snug them down tight.

I agree, that's what the spacers are there for.

All times are GMT -5. The time now is 08:10 PM.