Wanted: AMMCO 9000 Brake Lathe Manual
 

I am looking for a manual for an AMMCO 9000 Little Giant brake lathe of about 1960 vintage. Any help in finding one is greatly appreciated.

Thanks,

John

Re: Wanted: AMMCO 9000 Brake Lathe Manual
 

Find out who owns the company now and contact them. They have to, by law, send operating manuals at cost. If you get hurt it's their fault. I used this several times on old equipment back to at least 1950. It was the only thing good that Clinton did as president.

Re: Wanted: AMMCO 9000 Brake Lathe Manual
 

John, have you checked with SVI or Beam Equipment for a manual?

Re: Wanted: AMMCO 9000 Brake Lathe Manual
 

Not listed at Beam or SVI

Thanks,

John

Re: Wanted: AMMCO 9000 Brake Lathe Manual
 

Respectfully, not what I asked. Have you called or written asking them?

Several years ago Beam had an original manual to a machine I had but did not have it listed. They eventually found it and sold me a copy of it for my machine They knew it was a very limited machine and it was not worth digitizing it and printing a manual due to low quantity of machines. The 9000 was a popular machine in its day, so I would ask.

Re: Wanted: AMMCO 9000 Brake Lathe Manual
 

Over the years I have obtained many manuals from Beam!!!