The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   The Parts Store (https://www.fordbarn.com/forum/showthread.php?t=35049)

Ryan 04-22-2011 11:23 AM

The Parts Store
 

https://www.fordbarn.com/wp-content/u...1/04/parts.jpg

This one has been sent to me via email no less than 10 times... So, many of you guys have probably seen it as well. In any case, I wanted to post it simply because it's such a d... To read the rest of this blog entry from The Ford Barn, click here.

TonyM 04-22-2011 12:03 PM

Re: The Parts Store
 

Yep, great photo.

TM.

ken ct 04-22-2011 01:35 PM

Re: The Parts Store
 

Oh my god,i died and went to heaven. ken ct.

Model A Man 04-22-2011 02:32 PM

Re: The Parts Store
 

the good old days :-)

392roadster 04-22-2011 05:08 PM

Re: The Parts Store
 

Droooooooolllll!!!

Chris Haynes 04-22-2011 05:30 PM

Re: The Parts Store
 

Where is it?

rustyangels 04-22-2011 07:04 PM

Re: The Parts Store
 

Saw this on the HAMB too, History of Los Angeles thread

raceron1120 04-22-2011 07:29 PM

Re: The Parts Store
 

Oh yes, the good old days for sure! Kinda reminds me of a story I was told many years ago by an old-time & long-retired Ford Parts Manager. I was a young parts guy and Ernie - he had to have been in his late 70s or early 80s - would stop by the dealership once in awhile, I think he was lonely and missed working in the department. He'd come up to the counter and if we weren't busy he'd chat and reminisce about "the old days" with us. The building was old too, built in the early 40s when steel wasn't available - so all the trussess, rafters, framing etc. was wood. He'd look out across the service department and tell "... I remember when...." stories about back in the day.

He told about how there used to be a rail siding behind the dealership to unload cars off the trains, and also so a boxcar could be parked and the parts unloaded from it. He said that "during the war (WWII), there were shortages but we stocked nearly everything ... to build a car or truck from parts". Wish I could've seen it.

I'm guessing it resembled this picture. Thanks for posting it!


Tom Wesenberg 04-22-2011 07:39 PM

Re: The Parts Store
 

About 20 years ago I visited an old hardware store in Superior, Wisconsin and it was like going back to the turn of the century. Not only was it the largest hardware store I'd ever seen, but they had all kinds of goods as a 100 year old store would have. Coal buckets, copper boilers, wood stoves, horse harness, etc. I always wanted to get back there, but I heard the fire marshall shut them down and they had an auction. Too bad, as that was a piece of history I'll never see again, even in a museum.

My dad used to tell about a hardware store in Crocker, South Dakota that was so large a team of horses could enter the basement to unload the goods and turn around down there to leave. Imagine a hardware store that large in a town of less than 100 people.

I used to enjoy coming across old stores like that with the wood floors and old stock, but haven't been able to find any in many years. Now, with gas at $4 you can't just drive around looking for that stuff either.

CarlG 04-22-2011 09:19 PM

Re: The Parts Store
 

Quote:

Originally Posted by Tom Wesenberg (Post 197303)
...I used to enjoy coming across old stores like that with the wood floors and old stock, but haven't been able to find any in many years...

The last store I was in like this was McLendon's Hardware in Renton, WA. Years ago, Ol Man McLendon would greet you at the door, or you could find him sitting on a high stool talking with customers. He was 95 then. They had the wood floors, narrow isles, stuff everywhere! Years later the store burned down, but was rebuilt much like the old one was, just fireproof this time. They eventually grew out of that store and moved into an old K-Mart store. Now they look sorta like Lowes, only they still have lots of the "old" stuff you would expect to see in a 100 year old hardware store. I miss that place!

JimK1930A 04-22-2011 11:40 PM

Re: The Parts Store
 

It reminds me of Little Dearborn Antique Ford Parts store in Minneapolis, Minnesota.

Roach In Tacoma 04-23-2011 12:04 AM

Re: The Parts Store
 

Thats what Hagens was like before the Fire......

ratamahata 04-23-2011 01:37 AM

Re: The Parts Store
 

1 Attachment(s)
the wooden floor is made in heart pine, just kidding, most of the firsts houses in Argentina 1850-1900 had a wooden floors, the wood was heart pine export to Argentina from USA by Ship, the ship came to Argentina with a wood cargo using as ballast, the ships leaves the Argentina with cargo grains (cereals)

Mike V. Florida 04-23-2011 05:42 AM

Re: The Parts Store
 

There is a Packard museum here in Ft Lauderdale that has wood trusses. When they wanted to expand they were told they would have to replace all the trusses because of them being made of wood. Well the wood is Dade County pine, hard as steel, once aged you cannot put a nail into it. The owner took a truss and subjected it to stress testing to prove to the county that it was as strong as steel trusses, it beat the test. The museum was expanded and the wood trusses remain. (Dade county pine is extinct now).

Tim Ayers 04-23-2011 06:31 AM

Re: The Parts Store
 

Quote:

Originally Posted by Mike V. Florida (Post 197449)
There is a Packard museum here in Ft Lauderdale that has wood trusses. When they wanted to expand they were told they would have to replace all the trusses because of them being made of wood. Well the wood is Dade County pine, hard as steel, once aged you cannot put a nail into it. The owner took a truss and subjected it to stress testing to prove to the county that it was as strong as steel trusses, it beat the test. The museum was expanded and the wood trusses remain. (Dade county pine is extinct now).

That's great. I commend them for doing that.

I live in Hunterdon Co. NJ & if you took a B&W photo without any cars in it, you'd be hard pressed to tell what era or year it was taken.

We have a "country store" called Rambo's. It's like the stores you describe. They use to have a pot belly stove next to the meat counter. A previous owner [still works there as a butcher] is in a semi-famous blue grass band called the Byrd Boys. He'd play his guitar when things were slow around the stove.

I think some out-of-towner burner themselves on the stove so they had to take it out.

Anyway, you can still get 1 cent candy and other cool things like that. Old signs w/ the prices of food are all over the place and the floor is so worn in the well traveled areas are concaved.

I know my post isn't car-related but I try to go there whenever I can for I know they may not be around forever.

2manycars 04-23-2011 06:49 AM

Re: The Parts Store
 

Meriden CT had a hardware store like what is being discussed. When I put my car plaques on a large pine board about 1975, I went to the store and asked about some tiny nails to use to attach the plaques. The sales clerk, (no self service) told me what I wanted was escution pins and brought me to an isle of tiny drawers, where he showed me a selection of different size tiny brass nails. They were sold by the each, naturally, not in a plastic container of 50, even though you only wanted 10, as they are today. (if you can find them)

BCCHOPIT 04-23-2011 07:23 AM

Re: The Parts Store
 

That is very cool... thanks for posting the pic

Tom Wesenberg 04-23-2011 07:45 AM

Re: The Parts Store
 

Quote:

Originally Posted by Ryan (Post 196974)
https://www.fordbarn.com/wp-content/u...1/04/parts.jpg

This one has been sent to me via email no less than 10 times... So, many of you guys have probably seen it as well. In any case, I wanted to post it simply because it's such a d... To read the rest of this blog entry from The Ford Barn, click here.

Since today is "earthday":eek: and we are supposed to think about being "eco-friendly",:eek: this picture is a prime example of how much more "eco-friendly" they were in the good old days. You don't see any excess packaging here!:D:)

ratamahata 04-23-2011 08:01 AM

Re: The Parts Store
 

Quote:

Originally Posted by Mike V. Florida (Post 197449)
There is a Packard museum here in Ft Lauderdale that has wood trusses. When they wanted to expand they were told they would have to replace all the trusses because of them being made of wood. Well the wood is Dade County pine, hard as steel, once aged you cannot put a nail into it. The owner took a truss and subjected it to stress testing to prove to the county that it was as strong as steel trusses, it beat the test. The museum was expanded and the wood trusses remain. (Dade county pine is extinct now).

Mike in Argentina the old bridges and the sleepers of the railway tracks were originally made of a wood called quebracho (quiebra hacha), in the beginning of the century has also been widely used for having tannin for tanning leather.
http://en.wikipedia.org/wiki/Schinopsis_balansae

Deluxe Delivery 04-23-2011 10:26 AM

Re: The Parts Store
 

7 Attachment(s)
OK, not quite the same, but I thought barners would like a peek inside my gas station. It was run by my grandfather in the 20's and 30's. He had a Ford agency and sold anything automotive. Closed up in '39 and went fishin. Most of the merchandise is unsold stock original to the building, which I had to completely restore. Open the door and it's 1930 ! That's What I'm Talkin Bout! :)


All times are GMT -5. The time now is 10:35 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.