Does anyone have a wiring diagram for signal-stat 900 turn signal kit?
 

I'm installing a signal-stat 900 turn signal assembly in my 29 wagon. I bought it used several years ago. It came with no wiring diagram. Can anyone share one?
Thanks, Neil

Re: Does anyone have a wiring diagram for signal-stat 900 turn signal kit?
 

There is a wire with the flashing unit on it and a fuse assembly. Which side of the junction box should I attach it to?

There are 2 wires that go to the brake switch. Does it matter which side of the switch they go to? One is green and one is black.

Re: Does anyone have a wiring diagram for signal-stat 900 turn signal kit?
 

Why do the two wires go to the brake switch? The brake light already works?

Re: Does anyone have a wiring diagram for signal-stat 900 turn signal kit?
 

here you go

Re: Does anyone have a wiring diagram for signal-stat 900 turn signal kit?
 

I believe that the one that Snyders sells (with the four-way flashers) is a current model SignalStat 900. They have a wiring diagram available for download.

Re: Does anyone have a wiring diagram for signal-stat 900 turn signal kit?
 

The original set up was voltage came into the switch and when the pedal was pressed it went out to the stop lights. With the signal switch, IF you are using the brake lights as signal light too, then the power gets sent through the signal switch so it can dictate what light blinks and what shines as a stop light. If you are using separate lights for the signals then you can skip the brake switch.

Re: Does anyone have a wiring diagram for signal-stat 900 turn signal kit?
 

Neil, Here's a link to the complete 6 page installation instructions:

https://dalhems.com/f/d/f450e65244f4.../A13310A12.pdf

Re: Does anyone have a wiring diagram for signal-stat 900 turn signal kit?
 

Thank you everyone for your diagrams and advice.
I will let you know how everything goes.