Need help; Where does it go
 

I have a 31 Tudor and have all my parts primed and ready to reassemble. I’m baffled of what this part is and where does it go on the car?

Re: Need help; Where does it go
 

https://www.fordbarn.com/forum/attac...p;d=1750125705

Need help - Where does this piece go - tudor87

Re: Need help; Where does it go
 

Looks like the piece the hide-um welt goes into for the roof. I think it is the rear most part.

Mike

Re: Need help; Where does it go
 

I'll second that vote.

Re: Need help; Where does it go
 

on the back of the Tudor body where the quarter panel and the back panel meet isn't there a piece like this that "dresses" up the seam of the joint?

Re: Need help; Where does it go
 

JAK that joint is more of a “T” shape , I don’t think it is an original piece, if it’s aluminum it’s not original, at first I thought it might be for the front above the sun visor but the ends are turn the wrong way.

Re: Need help; Where does it go
 

I could be wrong, but I'd be willing to bet this piece has nothing to do with a Model A Tudor Sedan. I've restored a 29 and 30 Tudor (and working on another 29) and can't say I remember a piece like that anywhere. Of course, in 46 years of being around Model A Fords, I can definitely say there are times when "Ya learn something new every day".

If I had to take a stab in the dark, I'd definitely lean toward something to do with the inside of the rear body panels. But, I still think it's not Model A Tudor and may not be Model A at all.

Re: Need help; Where does it go
 

Thank you one and all for the input, this piece found its way into my epoxy primer pieces and for the life of me I can’t find where this puzzle piece goes. I think it was in with assorted pieces parts that came with the car. Thanks again for the help guys