The Ford Barn - Aluminum head

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)

- - Aluminum head (https://www.fordbarn.com/forum/showthread.php?t=349908)

fordfixer

06-13-2025 09:43 PM

Aluminum head

2 Attachment(s)

Pics of head in question.Attachment 568173

Attachment 568174

Hoping this works. I previewed the message and it showed the pics.
But going back to post the does not show pictures just these numbers.

1930artdeco

06-13-2025 09:46 PM

Re: Aluminum head

I see pics.

Bob C

06-13-2025 10:25 PM

Re: Aluminum head

That could be one of Tod Buttermore's heads.

nkaminar

06-14-2025 05:41 AM

Re: Aluminum head

It looks like a nice combustion chamber shape. No relief for the pistons so you must use pistons that don't come up over the top of the block at TDC. Looks like it may be 7 to 1. You can just measure the volume of the combustion chamber to calculate the compression ratio.

All times are GMT -5. The time now is 12:44 PM.