![]() |
53 Ford Ranch wagon front seat install I see the mounting holes for the front seat. But, looking at the seat it appears that the front should hook into some sort of bracket. Is this correct? Any help? Thanks. TommyJ
|
Re: 53 Ford Ranch wagon front seat install I am parting a 4dr '53 wagon, so pm me if parts needed. Newc
|
Re: 53 Ford Ranch wagon front seat install I don’t recall any specific brackets that the seat base fits into. On my ‘53 Ranch Wagon, I just lifted the seat in and had a helper lift while I reached thru the interior to pull the seat across the hump. Then set it down to line up with the holes. But it was 25+ years ago. I’ll look at it the garage tomorrow to see if my recollection is off base.
|
Re: 53 Ford Ranch wagon front seat install Quote:
Quote:
|
Re: 53 Ford Ranch wagon front seat install I am not sure if the front seat I have is correct. The seat adjuster lever on mine is on the left side. Should it be on the front? And it has a split back. Thanks. TommyJ
|
Re: 53 Ford Ranch wagon front seat install Quote:
|
Re: 53 Ford Ranch wagon front seat install 1 Attachment(s)
Yep the restoration guidelines are excellent. And I agree your seat sounds like the right one. My memory was pretty good… the seat brackets sit on the floor without any brackets or attachments to slide into. Simply held into place by two bolts on each side. Trying to attach a photo I just took under the seat. If I can attach the photo, you’ll see the floor sheetmetal in tan primer, and the galvanized bracket sits on the floor, with two bolts coming up thru the floor.
Bruce |
Re: 53 Ford Ranch wagon front seat install On my 54 Victoria, the seat just sits on the floor, no bracket is used. I would imagine that the 53 wagon would be the same.
|
Re: 53 Ford Ranch wagon front seat install Quote:
|
Re: 53 Ford Ranch wagon front seat install 3 Attachment(s)
First of all thanks for all the inputs and photos. Here is a pic of the mounting points on my front seat. Tommy J.
|
Re: 53 Ford Ranch wagon front seat install Quote:
https://www.fordbarn.com/forum/attac...5&d=1748895063 https://www.fordbarn.com/forum/attac...3&d=1748895336 |
Re: 53 Ford Ranch wagon front seat install I think I read that a 4 door front bench seat wouldn't work in the 2 door ranchwagon. Why specifically wouldn't it work? Would it not bolt up or are there other reasons. Reason I am asking is that I have access to a front bench seat out of a 53 4 door car.Thanks..TommyJ..
|
Re: 53 Ford Ranch wagon front seat install I think in a 2 door the seat back folds forward so you can get in the back seat and the 4 door seat back does not.
|
Re: 53 Ford Ranch wagon front seat install Quote:
|
Re: 53 Ford Ranch wagon front seat install Talking seats, I guess I need something to bolt them to. Anyone have a source for some floor pans / patch panels for a 53 Ranchwagon? OER and classic industry say they have them, but the only thing that shows up is metal plugs for the floor pans. Thanks..TommyJ
|
Re: 53 Ford Ranch wagon front seat install 3 Attachment(s)
I used floor pans from EMS for my '54 Ranch Wagon. Got them from Shoe Box Central. IMO easier to deal with Shoe Box than EN+MS Direct.
|
Re: 53 Ford Ranch wagon front seat install Quote:
|
Re: 53 Ford Ranch wagon front seat install Quote:
https://www.fordbarn.com/forum/attac...5&d=1749344448 https://www.fordbarn.com/forum/attac...6&d=1749344448 |
Re: 53 Ford Ranch wagon front seat install Quote:
|
All times are GMT -5. The time now is 08:16 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.