Island dwellers attend Swap Meet
 

An old friend and I headed off on the redeye (6:45) boat yesterday to attend the swap meet at the state fair grounds in Monroe. We don't get out much so we made sure to have some fun. Ran into some old car buddies as we all do at these things. In the past week I had made two sales to 'Barners and was anxious to spend some paypal $. Didn't take too long, but I think Tubman would approve. Actually I'm not sure the mallory dual point is the one I need, but it fits into the timing cover. Without looking at my stash of covers, it seems this distributor needs the one with the lower bearing. I have a couple of each. It came with this cover included for 35 bucks. An hour later I see a couple of merc 4 bolt manifolds, but this one caught my eye. I know nothing of GM carburetors, but I'm thinking this is the one Denny likes to turn backwards so the linkage works out. That was 200 bucks as pictured. I ain't sayin' what I paid for the Buddy L truck, as I'm no collector, but just always wanted an old toy truck with original paint for a shelf in my cozy little 'machine shop' (lounge). Appreciate comments about if I bought useable parts in case I want to do a minor 'hop up' on the 276 stroker we all built together in the winter of 2023-2024. Thanks, Gary

Re: Island dwellers attend Swap Meet
 

The aluminum 4 bolt Canadian Merc is the gold standard. Look for them. Newc

Re: Island dwellers attend Swap Meet
 

https://www.fordbarn.com/forum/attac...6&d=1747622059

https://www.fordbarn.com/forum/attac...7&d=1747622082

Re: Island dwellers attend Swap Meet
 

The timing cover looks like it's aluminum, but the manifold? If so... SCORE!!! The alloy timing covers bring good money. Are you sure that distributor is a Mallory?

Re: Island dwellers attend Swap Meet
 

Denny, no I'm not sure. Had a busy day so it's still in the back of my suburban.I will bring it in and see if I can make heads or tails of the tag. I will get some pics with the cap off. Is that carb the rochester? And I wish the manifold was aluminum. Woulda been a lot lighter to lug around. :)
.

Re: Island dwellers attend Swap Meet
 

Buddy L is cool stuff. Glad you had a nice day on the mainland, now get back to work!

LOL, hows the rear end project going?

Re: Island dwellers attend Swap Meet
 

Skip, you had'ta ask...

When all the parts came together for the rear axle I got into a work crunch for my best contractor. Then I got the opportunity to buy my diesel '59 f350 9' express back.....(a week of goofing with that), Then I ran into a guy that knew I liked inboard boats and he offered me a 20' shamrock. I had one with a marinized 302, but sold it when a guy offered me 9500 bucks for it. This one has a mercruiser 470. Engine has issues but I knew about a low hour
85 hp Perkins 4 cyl FWC diesel being pulled for an electric motor refit. So out it came. Buddy with a 30' boom truck pulled it for me.. Hadn't run for 25 years until about 3 hours ago. Had clean oil and antifreeze. I changed out the filters this morning. After a bunch of tinkering and wiring and temporary controls and a wooden stand I finally started it with a blast of wd 40 while cranking. Now it starts and runs very smooth. Shamrock offered that very diesel as an option in the 70s and 80s. I had some difficulty downloading the distrubutor photos so here's some of the boat stuff. Promise I'll go back to the swap meet parts tomorrow. It;s late now, even on the Left Coast.

Re: Island dwellers attend Swap Meet
 

https://www.fordbarn.com/forum/attac...1&d=1747633236

https://www.fordbarn.com/forum/attac...2&d=1747633257

https://www.fordbarn.com/forum/attac...3&d=1747633282

https://www.fordbarn.com/forum/attac...4&d=1747633317

Re: Island dwellers attend Swap Meet
 

Thanks Pete! And now that I have gone and hijacked my own thread, the questions remain. Is this a mallory dual point? Funny, one of the reasons I always liked the 8ba distributor is because it only has one set of points to adjust. And is the carb I bought a rochester 2GC? I'm beginning to feel like I just traded in the family's milking cow for a sack of magic beans. :)

Re: Island dwellers attend Swap Meet
 

Never a dull moment on Mt Picket! But why is that modern truck pulling the shamrock and not the 59 diesel?

Re: Island dwellers attend Swap Meet
 

Ask some of the 'Barners that have made the trip up Pickett's lane why. The modern f350 is a '92, 7.3, 5 spd 4x4. The '59 is 2wd and it's turbo diesel is 210 cu in. I think the '59 would do it if the road was paved, but that loose gravel on the last grade is a killer. Oh, I came up with those distributor pics. There is a number on the breaker plate 24875 and a numeral '8' on the opposite side of the plate, Carb pics next.

Re: Island dwellers attend Swap Meet
 

Hi Gary,
I was in my usual spot Area 606 stalls 73,74,75 at the end of the building (close to the bathrooms!) with no walls across from the newest building. Next year stop by. If I wasn't at the stall I was on a bathroom break! I have a newer (2023) F150, blue-gray instead of the red 2015. My truck is always parked in one of my stalls. I had a new complete, never assembled magnesium Halibrand V8 quick change there for sale but the right shopper never walked by, maybe next year I will sell it at Portland. Had it 1/2 price but nobody seemed interested.

Re: Island dwellers attend Swap Meet
 

I really like the vintage toy truck.

Re: Island dwellers attend Swap Meet
 

Dang, I will plan to look for you next year. I do recall seeing the quick change and wondering if that;s what it was. It was set up high on a display right? Sorry I have never been good at recognizing faces. I was the short guy wearing a dirty old waxed canvas rain coat and a tin hard hat, as I don't have sense enough to come in outa the rain....

Re: Island dwellers attend Swap Meet
 

Mike, it was good to see you at Portland this year. Hope you did well and I sold a lot of stuff. Already signed up for next year.

Re: Island dwellers attend Swap Meet
 

https://www.fordbarn.com/forum/attac...6&d=1747664441

https://www.fordbarn.com/forum/attac...7&d=1747664465

https://www.fordbarn.com/forum/attac...8&d=1747664487

Re: Island dwellers attend Swap Meet
 

Tom, I did REALLY well. Best ever at Portland. I will have Ron Love's 2 stalls as well as my own next year. Looking forward to it!
Mike

Re: Island dwellers attend Swap Meet
 

Carb photos. Maybe someone knows something about it. Also, since I have never had or seen a mallory dual point, is that what my distributor is? It looks so much like the ford one, is it maybe a stock carb with some kind of dual point kit in it, much like people install a petronix today?

Re: Island dwellers attend Swap Meet
 

That looks like the carb you want all right. It's a Chevrolet carb with the fuel inlet of the side which matches the Ford fuel line. (The other GM carbs usually have the fuel inlet on the front.) I haven't seen a Ford Load-A-Matic distributor for a while, but I'll bet that's one with a Mallory dual point conversion. The first piece of "Speed Equipment" I ever bought was one of those. I was a junior in high school in 1959.:rolleyes:

It's too bad it's missing the brass tag; getting the right rebuild kit is kinda hard to figure out without it. You'll notice that there is a mismatch between the carb base and the manifold that causes a vacuum leak. If you decide to use the carb, I'll send you a block-off plate I had made esecially for that purpose.

Re: Island dwellers attend Swap Meet
 

https://www.fordbarn.com/forum/attac...3&d=1747711285

https://www.fordbarn.com/forum/attac...4&d=1747711298

https://www.fordbarn.com/forum/attac...5&d=1747711317