Hilibrand quick change
 

Anyone out there have a hilibrand 101 quick change they would sell on know who makes a new one? Winters does not.

Re: Hilibrand quick change
 

Easily found on eBay.

Re: Hilibrand quick change
 

Take a look at the Pacific Quick Change web site. They are making brand new "A" and "V8" style Halibrand qc rear ends. They are in Austrailia, maybe have a US distributor?

Re: Hilibrand quick change
 

Or buy direct? The currency exchange rate is in your favour BUT you will have to pay that 10% tariff. Over all, you would do well.

Re: Hilibrand quick change
 

Not easy at all. I have been looking for a while

Re: Hilibrand quick change
 

I am looking for a quick change for my A model but If I could find a good differential in FL/Ga I would just go with it.

Re: Hilibrand quick change
 

I didn't didn't trouble finding one last year. Try HAMB.

Re: Hilibrand quick change
 

Try HotRodWorks.com
You may not find a 101/Mod A housing but a V8 with shortened axles might fill the bill.

J

Re: Hilibrand quick change
 

There is a 201 on the HAMB swap meet

Re: Hilibrand quick change
 

The 201 is the V8 version which uses larger r&p plus larger axle bells
The main problem will be width is going into a fender model a, it is too wide even with’35 axle
I had to narrow it up to fit properly

Hot Rod Works has the ability to make a QC that fits properly if you cannot find a 101 to use the Model A parts

Re: Hilibrand quick change
 

I have hot rod works plug in axles in my roadster. Great folks to deal with.


John

Re: Hilibrand quick change
 

I have a new spare KIWI quickchange for an A in NZ , We used to produce them ,