The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   Rochester 2gc rebuilder (https://www.fordbarn.com/forum/showthread.php?t=348984)

FordyOne 05-07-2025 11:42 PM
Rochester 2gc rebuilder
 

Who is the 2gc guy on here now?

51504bat 05-08-2025 07:49 AM
Re: Rochester 2gc rebuilder
 

scicala

FordyOne 05-08-2025 09:07 AM
Re: Rochester 2gc rebuilder
 

I can't find him on the members list. Maybe he will show up later. In the meantime my problem is my 2gc from a 1958 Chevrolet is leaking gas past the float bowl and running out into the intake. It is pretty clean inside and shows signs of a kit recently installed. Possibly it just needs a needle and seat but I think maybe the power valve stem is a bit to long and is holding the power valve at the bottom of the float bowl open. The leak is pretty big. If I cant't find a simple solution I will find someone to send it to.

Jack E/NJ 05-08-2025 09:22 AM
Re: Rochester 2gc rebuilder
 

https://www.fordbarn.com/forum/member.php?u=5934

scicala 05-08-2025 12:11 PM
Re: Rochester 2gc rebuilder
 

Quote:
Originally Posted by FordyOne (Post 2387994)
I can't find him on the members list. Maybe he will show up later. In the meantime my problem is my 2gc from a 1958 Chevrolet is leaking gas past the float bowl and running out into the intake. It is pretty clean inside and shows signs of a kit recently installed. Possibly it just needs a needle and seat but I think maybe the power valve stem is a bit to long and is holding the power valve at the bottom of the float bowl open. The leak is pretty big. If I cant't find a simple solution I will find someone to send it to.
I can help you with your '58 Chevy Rochester 2GC carburetor if you want.
Been doing them along with all domestic carbs since 1967.

Sal

FordyOne 05-08-2025 05:26 PM
Re: Rochester 2gc rebuilder
 

Sent you a pm

scicala 05-08-2025 05:29 PM
Re: Rochester 2gc rebuilder
 

Quote:
Originally Posted by FordyOne (Post 2388061)
Sent you a pm
I just replied with a PM.

Sal


All times are GMT -5. The time now is 06:11 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.