The Ford Barn - Distributor vacuum brake

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)

- - Distributor vacuum brake (https://www.fordbarn.com/forum/showthread.php?t=346599)

blownford

02-17-2025 01:39 PM

Distributor vacuum brake

What type of glue should I use to attach the leather to the plunger on a crab distributor

Kube	02-17-2025 01:49 PM

Re: Distributor vacuum brake

Quote:

Originally Posted by blownford (Post 2370183)

What type of glue should I use to attach the leather to the plunger on a crab distributor

If you have a correct fitting leather plunger, there is no need for any type of adhesive as the leather is pressed into the steel plunger.

Terry,OH

02-18-2025 03:05 PM

Re: Distributor vacuum brake

Rubber cement make sure everything is clean.

mcgarrett

02-18-2025 09:13 PM

Re: Distributor vacuum brake

Quote:

Originally Posted by Kube (Post 2370184)

If you have a correct fitting leather plunger, there is no need for any type of adhesive as the leather is pressed into the steel plunger.

As Kube said - they are pressed into the cavity in the plunger. If that won't work, try some Permatex Black weather strip adhesive.

All times are GMT -5. The time now is 06:28 PM.